Lubes/Cleaners

Designed to leave zero residue after application, Finish Line’s Bicycle Disc Brake Cleaner displaces any moisture built up on the pad or rotor, resulting in improved and predictable braking, and reduced brake squeal. With the unique characteristic of being acetone free, Finish Line’s Bicycle Disc Brake Cleaner is strong enough to clean the dirtiest rotors, yet safe enough to use around paint, carbon fiber and plastic parts. - Engineered to rapidly clean disc brake rotors and pads - Acetone-free formula

Help your bearings run smoother and longer with Finish Line's Ceramic Grease. Its special blend of ceramic particles, Teflon and synthetic oils helps lube your bearings and dissipate heat, guaranteeing longer life and better function. Plus, it works great on stems, posts, cables and other threaded assemblies, too. - Optimizes performance and efficiency of bottom brackets, hubs and headset bearings - Use on stems, seat posts, cables and any threaded assemblies - Prevents rusting even when exposed to salt water - Clear and non-staining

Finish Line's Ceramic Wet Lubricant provides outstanding protection for your drivetrain in even the nastiest conditions. Its ceramic bonding technology allows you to greatly extend your re-lubing intervals so you can spend more time riding and less time on routine maintenance. In fact, every time you apply the lube, it builds on the ceramic coating and the result is a chain so slippery even dirt has a hard time sticking! Think efficient. Think quiet. Think Finish Line!

Finish Line's Chill Zone works like magic to loosen and free rusted parts! Before discarding your rusted chain or giving up on a frozen crank bolt, a sticky derailleur, or a seized seatpost, give Chill Zone a shot. Bike parts that normally need to be replaced can be reconditioned to ride another day. Chill Zone has a special refrigerant that freezes metal as low as -50°F/-45°C contracting it and breaking the rust bond. Then Chill Zone's penetrant breaks down and flushes out the rust. With Chill Zone, most rusted parts quickly regain full functionality. Plus, it lubricates, too, so you don't need to add any. - Great for frozen crank bolts, seized seat posts and rusty chains and derailleurs - Includes oils and rust inhibitors to provide lubrication and protection after use - Use: Spray the rusted part for 10 to 20 seconds and wait 2-3 minutes for the release agent to fully wick in and break the rust. For severe rust-welded parts, spray 30-60 seconds for maximum freezing effect and wait ten minutes to one hour for thorough break-down of rust. When rehabbing a bicycle chain, soak one small section at a time.

Finish Line Citrus Degreaser. Super strong and fast. Cuts through the toughest of carbonized grit, grease, and grime. Low surface tension for thorough penetration into all areas. 100% active, biodegradable and nontoxic.

Finish Line's Fiber Grip Assembly Gel is specially designed to create friction and reduce slippage between clamped carbon fiber surfaces. It eliminates the need to over tighten clamps to achieve secure connections. Plus, it's been tested and approved by leading carbon fiber component manufacturers.

Finish Line's Mineral Oil Brake Fluid is high quality to provide maximum fluid life and braking power. It features a super-low viscosity to yield superior lever response and pad retraction. Plus, it won't foam up even on long, challenging downhills.

Clipless pedals require regular maintenance for optimum performance and longevity. Finish Line's Pedal and Cleat Lubricant sprays on to fully and evenly coat all frictional surfaces and is engineered to ensure you click in and out of your pedals quickly, easily and smoothly every time. It also helps prevent creaks and squeaks from the pedal/cleat interface. Plus, thanks to a 100% dry-to-the-touch (in seconds) micro-thin coating, there is no oily, greasy film. So, it's safe to walk around on floors in your cycling shoes. Finish Line's Cleat and Pedal Lubricant was designed in conjunction with the pedal experts at Speedplay.

Finish Line's Premium Grease With Teflon is a race-proven lubricant formulated for the unique demands of bicycle bearings. It's exceptionally strong and thick, it doesn't separate and it repels water even when submerged. Additionally, it's very slick and tough and lasts as much as five times longer than petroleum grease.

Finish Line's Premium Grease With Teflon is a race-proven lubricant formulated for the unique demands of bicycle bearings. It's exceptionally strong and thick, it doesn't separate and it repels water even when submerged. Rated "5 Chainrings, Exceptional Grease" by Bicycling Magazine, it's very slick and very tough and lasts as much as 5 times longer than petroleum grease.

Finish Line Showroom Polish is made with Teflon fluoropolymer and uses DuPont Teflon Surface Protector technology. Provides a brilliant shine plus long term protection on all surfaces of a bicycle. 100% safe for all plastics, rubbers and carbon fiber parts.

- A super duty cleaner that strips the toughest residues, Including brake rotor surface grime - Dries fast with no oily residue left behind - Exceeds all federal v.O.C. And california carb regulations - Law prohibits orm-D materials from shipping by air

Finish Line's Super Bike Wash quickly cleans dirt, clay, road grime and chain gunk off your bike. Five different cleaning agents work together to create a high-speed cleaning system. Three different rust and oxidation inhibitors protect metal surfaces to prevent rusting. It's safe for all bike surfaces.

For extreme conditions, you need an extreme lube. That's when you grab Finish Line's Wet Lubricant. It's ultra water-resistant and long-lasting thanks to its special formulation of synthetic oils, special polymers and anti-wear additives. This lube delivers superb drivetrain lubrication and protection and it's the ultimate choice for muddy off-road rides, all-day epics and long, rainy commutes. - Formulated with high viscosity synthetic oils, water repelling polymers, and advanced anti-wear additives - Will require more attention to drivetrain cleanliness, but delivers the ultimate in lubricity and protection - Upon application, wipe excess off chain to minimize attraction of dirt and grime - Finish Line's Wet Lubricant delivers the ultimate in lubricity and protection. It requires a little more attention to drivetrain cleanliness compared to Finish Line's Dry or Wax lubes.

Need to give your bike some quick attention before you head out the door? Give it a quick shot of Finish Line's 1-Step Cleaner And Lubricant. It loosens and removes grime, while at the same time laying down a thin layer of low-friction lube that reduces drivetrain noise and premature component wear. Keeping your bike running smooth has never been easier!

Titanium is a super-light, exceptionally strong material that's great for bicycle frames and components, yet it requires a little special care for the best results. To stop cold-welding, galling or seizing of titanium components and fasteners, Finish Line offers Anti-Seize Assembly Lubricant. It's a premium blend of synthetic oils, graphite, bronze, copper and aluminum complex and works great as a conventional anti-seize for aluminum, stainless steel, and other specialty metals, too. - Works on all metals, but highly recommended when attaching reactive metals like titanium, aluminum, stainless steel and specialty alloys and magnesium - Prevents cold-welding, galling, and seizing of metal to metal contact parts, especially those subject to high torque and moist conditions such as bolt threads, seat posts, pedals and bottom brackets - 3-Pack of 6.5cc Sachets

For a clean, smooth-pedaling drivetrain, look no further than Finish Line's Ceramic Wax Lubricant. Its ceramic bonding technology allows you to greatly extend your re-lubing intervals for maximum durability and convenience. In fact, every time you apply the lube, it builds on the ceramic coating and the result is a chain so slippery even dirt has a hard time sticking! Think efficient. Think quiet. Think Finish Line! - With each application the ceramic coating is enhanced, ultimately providing the durability of many oil-based lubricants - No wetness or stickiness so dirt and grime will not be attracted or absorbed by the lubricant - Helps avoid abrasive wear allowing parts to run more smoothly and last longer - As the white ceramic particles embed themselves on the chain they will displace grime, causing a grey or black film to form on top of the wax coating. Over 2-3 applications this will lessen or cease. This discoloration is normal and will not compromise performance.

Ceramic WET is Finish Line’s most advanced and most effective racing lubricant. This wet-style full synthetic lubricant is enhanced with a nano-sized platelets of boron nitride and micron particles of fluoropolymer that build a ceramic coating on the frictional surfaces of parts. Ceramic WET’s extreme durability, amazing smoothness and ultimate quietness ensures maximum drivetrain efficiency. Ceramic WET can be used in all disciplines: Mountain bike, cyclo-cross, road and track racing.

Finish Line's Ceramic Wet Lubricant provides outstanding protection for your drivetrain in even the nastiest conditions. Its ceramic bonding technology allows you to greatly extend your re-lubing intervals so you can spend more time riding and less time on routine maintenance. In fact, every time you apply the lube, it builds on the ceramic coating and the result is a chain so slippery even dirt has a hard time sticking! Think efficient. Think quiet. Think Finish Line!

Finish Line's Citrus Degreaser was cycling's original orange peel-based degreaser and it has set the standard in bike parts cleaning since 1988. Super strong and fast-working to cut through grime and crud, it's formulated with powerful and natural citrus extracts. With Citrus your drivetrain will clean up faster and with less scrubbing whether it's covered with grease, oil or wax. Plus, you can simply rinse with water for a residue-free finish.

Reach for Finish Line's Citrus Degreaser when you've got tough grit and grime to cut through. Your parts clean up fast and then rinse residue-free with water. This degreaser is concentrated and water soluble so you can dilute it with up to 25 parts water for less difficult jobs. It's 100% biodegradable and completely non-toxic, too.

Finish Line's DOT 5.1 Brake Fluid is a high-quality fluid for maximum life and braking power. It exceeds the most stringent 5.1 specs and is compatible/mixable with all DOT 3, 4 or 5.1 spec'd systems. It also features a super-low viscosity to yield superior lever response and pad retraction. Plus, it won't foam up even on long, challenging downhills.

Finish Line's Dry Lubricant with Teflon keeps your bike running silky-smooth rain or shine. It's very thin yet extremely durable thanks to its synthetic oils and Teflon particles. Great for your chain, cables, cleats and springs, its dry surface texture minimizes the accumulation of dirt and grit. Plus, it's biodegradable. - Great for dry, dirty and dusty environments. Attracts less grime and runs clean - Holds up well in moderately wet conditions - Can be used on derailleurs, shifters, cables and brake pivot points - Finish Line's most popular and versatile lubricant

E-Bike Cleaner is formulated to remove grit and grime from frames, wheels and components of e-Bikes. To ensure a clean e-Bike while not damaging expensive electronic components, Finish Line engineered a clinging foam cleaner that is gentle, noncaustic, leaves no streaks, and requires no water rinsing. Finish Line’s e-Bike Cleaner is an ideal complement to any dealer specializing in e-bike sales and service.

E-Bike Chain Lube is designed to handle the unique requirements of electronic assist bicycles. E-Bike chains are exposed to higher torque and wattage loads. With this in mind, Finish Line engineered a light wet lube with unique extreme pressure additives to ensure that the lube stays within the premature wear and protecting against rust and corrosion. Finish Line’s E-Bike Chain Lube is an ideal complement to any dealer specializing in e-Bike sales and service.

Finish Line's E-Shift Groupset Cleaner is specially formulated to keep your sensitive and expensive electronic drivetrain clean and safe. It quickly and safely removes grit, grime and moisture from electric shifting drivetrain components, including the front and rear derailleur, derailleur pulleys, chain, cassette and even the crankset. E-Shift is safe and will not harm the wires or electronics. Plus, it dries in minutes leaving the drivetrain parts clean, and with no rinsing required.

Finish Line's E-Shift Groupset Cleaner is specially formulated to keep your sensitive and expensive electronic drivetrain clean and safe. It quickly and safely removes grit, grime and moisture from electric shifting drivetrain components, including the front and rear derailleur, derailleur pulleys, chain, cassette and even the crankset. E-Shift is safe and will not harm the wires or electronics. Plus, it dries in minutes leaving the drivetrain parts clean, and with no rinsing required.

- A biodegradable degreaser that cuts through the toughest grime - Strong enough for the metal parts, Yet safe enough to clean parts with rubber o-rings and seals, urethane elastomers, and painted surfaces - Exceeds all federal V.O.C. and California carbon regulations - Law prohibits ORM-D materials from shipping by air

Finish Line's Extreme Fluoro Grease is made with pure DuPont fluorinated ingredients for outstanding durability and unbeatable smoothness. It's recommended for use on precision parts, especially ceramic and conventional bearings, where you need maximum protection from the elements and heat. This low-friction grease even works great on cable wires, derailleur pivots, stanchions, pedal springs and other vital moving parts.

Finish Line Premium Grease is Super Slick and made with Teflon fluoropolymers. This 100% synthetic oil grease coats ball bearings and races, preventing wear and distortion in headsets and bottom brackets, even in brutal down hill racing and over extended periods of time. The slickest, toughest bicycle grease available. No matter how hard or long you ride, Finish Line Premium Grease will provide the lubrication your bearings require. New “functional” thickener totally prevents rust and corrosion (even in saltwater).