Bikes

Hill Conquering Gear Range The Microshift Acolyte Super Short Derailleur allows the Alpha Series bikes to use an 11-38t cassette. This gives 90% more gear range than other comparable bikes. Kid Friendly Shifting Microshift is the only drivetrain maker to focus on kids sized shifters. Easy-to-reach triggers and ultra-light shifting action make this the #1 shifter for kids. Kid Sized Control Center Short stems, handlebars sized to match shoulder width, easy-to-reach brakes, and a kid-friendly shifter. All features that give the rider control of their steed. Confidence Inspiring Geometry Low standover allowing young riders to get on a bigger wheel earlier. Bigger wheels roll faster, offer more traction, and roll over obstacles with less effort. Upright seating position with just enough weight over the front of the bike to maintain control and balance. A low center of gravity that's designed to keep the riders weight "in" the bike, rather than on top. Short chainstays keep the bike agile, while a slack front end keeps things stable at all speeds. HEIR Kid Optimized Crank HEIR cranks use specific lengths and widths to match young riders pedaling ergonomics. The Dual Alloy Chainguards keep the chain on in all terrain, while protecting the rider's pants from getting caught.

Hill Conquering Gear Range The Microshift Acolyte Super Short Derailleur allows the Alpha Series bikes to use an 11-38t cassette. This gives 90% more gear range than other comparable bikes. Kid Friendly Shifting Microshift is the only drivetrain maker to focus on kids sized shifters. Easy-to-reach triggers and ultra-light shifting action make this the #1 shifter for kids. Kid Sized Control Center Short stems, handlebars sized to match shoulder width, easy-to-reach brakes, and a kid-friendly shifter. All features that give the rider control of their steed. Confidence Inspiring Geometry Low standover allowing young riders to get on a bigger wheel earlier. Bigger wheels roll faster, offer more traction, and roll over obstacles with less effort. Upright seating position with just enough weight over the front of the bike to maintain control and balance. A low center of gravity that's designed to keep the riders weight "in" the bike, rather than on top. Short chainstays keep the bike agile, while a slack front end keeps things stable at all speeds. HEIR Kid Optimized Crank HEIR cranks use specific lengths and widths to match young riders pedaling ergonomics. The Dual Alloy Chainguards keep the chain on in all terrain, while protecting the rider's pants from getting caught.

Kid Optimized Crank and Chainguard The HEIR cranks are custom sized for each bike size to make sure little riders have optimum pedal ergonomics. The ultra-narrow Q-factors matches narrow hips of young cyclists. Technical mumbo jumbo translation: more comfort and efficiency for small riders. We also updated our chainguard to ensure shoelaces and pant legs stay snag free. THRU-TUBE™ Frame The Alpha Two's unique frame is designed to keep riders low, confident and agile. The unique THRU-TUBE™unlocks class leading low seat height and seat height range, and improves pedaling ergonomics while keeping the rider's feet close to the ground. HEIR Frame Hugger™ Saddle The unique interface between the seat post and saddle allow the Frame Hugger saddle to get ultra low to accommodate small riders, while providing an ultra-wide height adjustment range for growing riders. Kid Friendly Hubs The hubs are equipped with rounded axle bolts that minimize hard edges. And because kids are going to run their bikes through muck, the hubs have rubber seals to keep out dirt and grime. Kid Optimized Cockpit This is where little riders command their steed. It's decked out with ultra small diameter grips and brake levers that are designed for small hands, and have reach adjustment. Forged Dropouts Kids are going to put their bikes through the ringer, so Prevelo bikes are built kid tough with robust BMX track style forged dropouts that shroud the rear axle.

BUILT FOR ENDURANCE READY TO CONQUER THE VICTORY. Paris is a bicycle developed and created to ensure maximum comfort without forgetting the racing spirit of every Pinarello bicycle. The biggest difference from Dogma and Prince is in fact the Reach and Stack: A real balance found by our PinaLab technicians about a geometric solution that lengthens the bike and makes it more comfortable to ride, without losing the reactivity, a key feature for a road bike. Thanks to its particular characteristics, Paris reveals his distinctive focus on the long-distance, keeping the Pinarello DNA. CARBON T600 UD A comfort-optimized carbon fiber structure with a unidirectional finishing that absorbs all road vibrations for a pleasurable and comfortable ride. ONDA FORK A distinctive Pinarello Technology since 2000. The shape of the fork delivers precise turning abilities, stability, and reduction of longitudinal and lateral shocks.

PURE EMOTION. We asked our designers and engineers to transfer the amazing riding experience of DOGMA F12 to the new PRINCE. The result is a bicycle with technical characteristics and performance standards that outperform many high-end Road bikes on the market today, and the reason that the PRINCE is a real alternative to DOGMA F12. The Prince inherits the DOGMA F12 total cable integration system, called TiCR, which enables a significant aerodynamic advantage.

Powerful, modern and reliable. The OM1 S will guide you to success in any situation. The new OM1 S is produced in the territory where Officine Mattio is located, in the province of Cuneo. A monocoque frame that marks the beginning of a new manufacturing philosophy: the "Made in Cuneo" element.

Saving weight means little without retaining an appropriate level of stiffness and responsiveness too. So we've taken all the acceleration and out-of-the-saddle sprint qualities of a carbon XC race rocket and fused them with a rear-end that still rails corners like a hardcore trail bike. This unique XC-trail attitude is also reflected in the geometry. The head tube angle (67.1 degrees) and reach (425mm) are a little steeper and shorter than a Joplin to meet the demands of aggressive climbing, yet the Wilder's seat tube angle is a touch slacker and the chainstays a little longer than a Joplin too in order to retain that familiar Juliana confidence on descents. And talking of chainstays, each chainstay length is specific to the individual frame size; meaning riders of every height enjoy the same handling and performance no matter what. Beyond the details, there are some bigger features that amplify this XC wild child's abilities. Rapid rolling 29-inch wheels are paired with a 120mm fork to tame the feral lines and smooth the sketchiest of passing maneuvers. There's even room for two water bottles within the front triangle for bigger training and racing days.

Caledonia doesn't fit in a box nicely, and we like it that way. It was conceived on our Thursday night rides-routes that often play fast and loose with 'road ride.' Modern road riders are looking for bikes to handle long-distance, high pace, no limits, and offer maximum fun - the Caledonia delivers performance, comfort, and speed. Oh, and you can fit a 34mm tire in there. Or 31mm with fenders. - Removable FDM Our bolt-on front derailleur mount is made from high-strength aluminum alloy and attaches to the frame with two countersunk screws. This allows for easy replacement in the event of damage but also enables you to adapt to new standards as they become available or remove the front derailleur mount completely if you choose a 1x system. - Integrated Accessory Mounts Integrated mounts enable the use of fenders, lights, and computers without compromising the aerodynamics or structure of your bike. The built-in mount systems provide a simple and clean-looking solution.

A NEW BIKE FOR CLASSIC RIDES We don't see road bikes as delicate machines meant only for putting watts into and receiving speed from. They're an extension of our soul, of the way we want to see our worlds, and the lives we want to live. Sometimes that means cutting across park grass, and sometimes it's seeing where that dirt road off to the left leads you. The Caledonia-5 is a bike for the modern road rider. The Caledonia is the bike we keep reaching for when we know the odometer's going well past the triple-digit mark. Long rides invariably have some smooth tarmac, some junk pavement over backroads, a cutty singletrack connector, and maybe even your own local Strade Bianche sector. So we built a bike that could take on all of them, do it well, and fit fenders in case the ominous clouds turn into a downpour 130km into your day. We developed the Caledonia-5 in collaboration with our World Tour riders to satisfy the need for a dedicated cobbles bike. Faster handling isn't necessarily better-we engineered the handling based on the specific use-case. In this case, it's Roubaix. Roubaix is harder on bikes than any other race on the calendar, and there's zero margin for error. We increased the rear center, lowered the BB, and increased the trail. The handling is still fast, but we've added stability. Modern road riders are looking for bikes to handle long-distance, high pace, no limits, and offer maximum fun. By placing lower modulus carbon in key areas to mitigate the brittleness of hi-mod fiber-the Caledonia delivers performance, comfort, and speed. Oh, and you can fit a 34mm tire in there. Or 31mm with fenders.

UNDISPUTEDLY THE FASTEST BIKE OF THE MODERN ERA The S5 has one job—get to the line before everyone else. Under the likes of Wout van Aert, Marianne Vos, and Christophe LaPorte, the new model has already proven itself as a tool without equal. In the 2022 Tour de France, this bike propelled Wout to the highest ever Points Classification score of the modern era. At 480, Wout was some 194 points ahead of his nearest rival—tangible proof that Cervélo keeps delivering aerodynamic gains to our World Tour athletes. The new S5 has reduced drag by 65 grams, and increased the frame’s surface area while still reducing overall weight. The deeper frame sections maximize the shapes allowed by the UCI. Meanwhile the iconic V-stem has been further refined and a new fork designed to simplify the entire front end. What’s more, a ground-breaking new wheel design concept has been co-developed with Reserve to increase stability and reduce drag in turbulent aero conditions.

The Roadmachine's frame and fork are constructed with our Premium Carbon, using TCC Endurance technology. Internal cable routing replaces the Roadmachine 01's ICS technology, but the Premium Carbon D-Shape seatpost remains, for optimum seated compliance. This model has an ICS1 stem, compact aluminium bar, and Shimano's latest Ultegra Di2 12-speed compact groupset, with CRD-321 Carbon tubeless ready wheels and 28mm tires for comfort and traction. - Shimano Ultegra Di2 Drivetrain - CRD-321 Carbon Wheelset - ICS1 Integrated Cockpit Design and Premium Carbon D-Shape Seatpost Tuned Compliance Concept (TCC) Endurance The most capable version of our TCC technology: take the edge off the roughest roads to push harder and ride further. The ultimate balance between comfort and performance for a ride that is both forgiving and fast. Integrated Cockpit System (ICS) The aesthetic simplicity and innovative functionality of the Integrated Cockpit is the epitome of Swiss engineering and design. ICS keeps shifter wires and brake lines in their place: out of sight. D-Shape Seatpost The new D-Shape compliance post's carbon layup was designed using TCC Endurance technology for tailored comfort. Integrated Seat Clamp The seamless and functional integrated seatpost clamp is hidden within the frame

10 years ago, we launched a bike that kickstarted a revolution in the design and construction of the performance road bike. The Teammachine SLR has won every major title that a bike can win, including Monuments, World Championships, Olympic Games, and the Tour de France. Using the combined knowledge from the past decade, we've changed the game again to deliver an all-new, class-leading frameset ready to lead for another 10 years. ACCELERATED COMPOSITES EVOLUTION TECHNOLOGIE + (ACE+) - ACE+ not only runs through thousands of virtual prototypes using Stiffness, Weight, and Compliance as key influencers, but now includes a fourth key factor in the prototyping, Aerodynamics. INTEGRATED COCKPIT SYSTEM (ICS) - The aesthetic simplicity and innovative functionality of the Integrated Cockpit is the epitome of Swiss engineering and design. ICS keeps cables and housing in their place: out of sight. D-SHAPE SEAT POST - Improved seatpost design removing any excess materials, providing aerodynamic benefits and extra compliance. BOTTOM BRACKET AND TORSIONAL STIFFNESS - Renowned for its power transfer, the new Teammachine SLR goes one step further with a wider bottom bracket contact area provided by the new downtube shape and the optimized carbon layup. FORK PROFILE - An aerodynamically reshaped fork with stealth dropout design and integrated thru-axle nut show that high technical proficiency can go hand in hand with beautiful, minimalist aesthetics. AEROCORE DESIGN - Our Aerocore system consists of two superlight carbon cages that seamlessly integrate into the reshaped downtube and seat tube, resulting in significant drag reduction when used with bottles. COMFORT IS SPEED - The new Teammachine SLR is more compliant than ever, thanks to the latest evolution of the Tuned Compliance Concept (TCC) technology. Fine-tuning of the carbon layups offers essential vertical frame and seatpost flex to improve traction and control, resulting in reduced muscle fatigue.

Specifically designed for the Swiss National Track Team and sporting a record that includes a World Championship title, it’s clear that the Trackmachine is the weapon of choice for the velodrome. Technology: - VMAX Technology: p2p x subA: The formula for high-performance cycling – Position-to-Perform maximizes the adjustability of your riding position while SubA innovation creates an incredibly fast frame profile. Do the math! - p2p Integrated Seatpost: The p2p integrated seatpost offers 4 different saddle hardware attachment possibilities for maximum rider position adjustability (only Trackmachine 01) - Adjustable Dropouts: Replaceable and adjustable full-stainless steel dropouts. - p2p Modular Stem: The p2p modular stem is adjustable in length and in height, delivering optimized stiffness and steering precision.

A bike with plenty of opportunity, the Arcade really showcases the endless detail and unrivaled quality that we put into our bikes. This super-dialed bicycle rolls on SALT's super-wide 36mm Valon rims with sealed hubs, carrying a full assortment of nylon hub guards that allow you to have a solid and dependable set of wheels under you at all times. Available in both a 20.5" and a longer 21" option, the Arcade will give senior riders the ability to ride one of the most popular bikes in our line.

One of the most anticipated bikes in BMX, the CRS is back for 2021 with even more bang for your buck. Now featuring a sealed front hub, this all-terrain slayer rolls smoother than ever. Packed full of aftermarket parts from ECLAT, including the Bios Pivotal seat and Pure seat clamp, the CRS looks and rides like a bike twice the price tag. The geometry has been tailored to allow for greater progression of the younger generation. The super-short 12.75" chainstays, 165mm cranks, and shorter 26mm fork give the CRS a snappy and agile ride that is perfect for learning and advancing. A bike truly built with vision, the CRS is unlike anything else.

Based on the same bikes that We The People pro, Felix Prangenberg, rode last season, the Justice features revised geometry and a never before seen parts overhaul from We The People. Our new Activate tire, Paragon plastic guard sprocket, and Perfect grips make this new-school urban machine more stacked than ever before. Paired up with a shorter 22mm-offset fork and a full assortment of plastic hub guards, you'd be forgiven for thinking that you're riding a full custom build.

Bridge Club is a highly versatile touring bike that perfectly hits the sweet spot, spanning on- and off-road excursions. Bridge Club is for those multi-surface outings — planned or unplanned. We've all run out the clock on a dirt tour and had to add in some paved shortcuts. Conversely, when you’re feeling a little zesty on your next road tour, Bridge Club is ready for reroutes through the woods. Some people hear "bike touring" and immediately think of long-forgotten stretches of highway, small-town oddities, and roadside attractions. Some instantly recall desolate stretches of desert dirt roads or lush green forest trails. With Bridge Club, you can have your dessert and eat it too! - Ultra-focused on simplicity, it only has the barnacles that matter most to the discerning bike tourist - Two build kit options: Pavement (700c) and Off-Road (27.5-inch) - Run racks and panniers, framebags, or all of the above - Disc brake-specific, single position, vertical rear dropout makes it less intimidating than other bikes in the category - Clearance for 700 x 47mm tires (with or without fenders), 27.5 x 2.80 tires (27.5 x 2.60 with fenders), and 26 x 3.0 tires (26 x 2.80 with fenders)

As a highly versatile touring bike, the Bridge Club hits the sweet spot that separates on- and off-road excursions. The simplistic design makes it fully adept to handle a full rack and pannier setup, frame bags, or any combination of the two. It doesn’t feel sluggish on paved shortcuts, but can also hold its own on dirt detours. If you’re feeling a little zesty on your next road tour, you won’t be ill-prepared for reroutes through the woods. The Bridge Club is designed to handle it all. - 100% Surly Chromoly frame, main triangle is double-butted; 1-1/8" threadless Chromoly fork - Rack, fender, and four sets of three-pack mounts - Disc brake-specific, single-position vertical rear dropout makes it less intimidating than other bikes in the category - Clearance for 700 x 47mm (with or without fenders) or 27.5 x 2.8" tires (27.5 x 2.6" with fenders)

Bridge Club is a highly versatile touring bike that perfectly hits the sweet spot spanning on- and off-road excursions. Bridge Club is for those multi-surface outings — planned or unplanned. We've all run out the clock on a dirt tour and had to add in some paved shortcuts. Conversely, when you’re feeling a little zesty on your next road tour, Bridge Club is ready for reroutes through the woods. Some people hear "bike touring" and immediately think of long-forgotten stretches of highway, small-town oddities, and roadside attractions. Some instantly recall desolate stretches of desert dirt roads or lush green forest trails. With Bridge Club, you can have your dessert and eat it too! - Ultra-focused on simplicity, it only has the barnacles that matter most to the discerning bike tourist - Two build kit options: Pavement (700c) and Off-Road (27.5-inch) - Run racks and panniers, framebags, or all of the above - Disc brake-specific, single position, vertical rear dropout makes it less intimidating than other bikes in the category - Clearance for 700 x 47mm tires (with or without fenders), 27.5 x 2.80 tires (27.5 x 2.60 with fenders), and 26 x 3.0 tires (26 x 2.80 with fenders)

As a highly versatile touring bike, the Bridge Club hits the sweet spot that separates on- and off-road excursions. The simplistic design makes it fully adept to handle a full rack and pannier setup, frame bags, or any combination of the two. It doesn’t feel sluggish on paved shortcuts, but can also hold its own on dirt detours. If you’re feeling a little zesty on your next road tour, you won’t be ill-prepared for reroutes through the woods. The Bridge Club is designed to handle it all. - 100% Surly Chromoly frame, main triangle is double-butted; 1-1/8" threadless Chromoly fork - Rack, fender, and four sets of three-pack mounts - Disc brake-specific, single-position vertical rear dropout makes it less intimidating than other bikes in the category - Clearance for 700 x 47mm (with or without fenders) or 27.5 x 2.8" tires (27.5 x 2.6" with fenders)

As a highly versatile touring bike, the Bridge Club hits the sweet spot that separates on- and off-road excursions. The simplistic design makes it fully adept to handle a full rack and pannier setup, frame bags, or any combination of the two. It doesn’t feel sluggish on paved shortcuts, but can also hold its own on dirt detours. If you’re feeling a little zesty on your next road tour, you won’t be ill-prepared for reroutes through the woods. The Bridge Club is designed to handle it all. - 100% Surly 4130 CroMoly frame, main triangle is double-butted - 1-1/8" threadless CroMoly fork - Rack, fender, and four sets of Three-Pack mounts - Disc Brake-specific - Single-position vertical rear dropout - 27.5 x 2.8” tire clearance

As a highly versatile touring bike, the Bridge Club hits the sweet spot that separates on- and off-road excursions. The simplistic design makes it fully adept to handle a full rack and pannier setup, frame bags, or any combination of the two. It doesn’t feel sluggish on paved shortcuts, but can also hold its own on dirt detours. If you’re feeling a little zesty on your next road tour, you won’t be ill-prepared for reroutes through the woods. The Bridge Club is designed to handle it all. - 100% Surly 4130 CroMoly frame, main triangle is double-butted - 1-1/8" threadless CroMoly fork - Rack, fender, and four sets of Three-Pack mounts - Disc Brake-specific - Single-position vertical rear dropout - 27.5 x 2.8” tire clearance

A class-leading touring bike, the newly redesigned Disc Trucker provides versatility and dependability on the daily commute or trans-continental excursion. Fork blade three-pack mounts enable you to attach and haul even more stuff, and the frame features a low bottom bracket and long chainstays for comfort and stability while loaded down. With increased stack height and improved standover clearance, plus ample space for larger tires and fenders, it’s designed to go the distance. Introduced in 2012, the Disc Trucker is widely considered one of the best-in-class touring bicycles available today. Truly at home on the road, it features updated geo and modern component compatibility, along with versatile mounting options that make it ideal for daily commutes and months-long disappearing acts alike. Built from Surly’s proprietary, touring-compliant 'Natch tubesets, updates to the Disc Trucker include a shortened seat tube and slightly sloped top tube for better stand-over clearance, plus an increased stack height for a more relaxed riding position. Shortened chainstays offer improved stiffness and maneuverability around corners, while 12mm thru-axles provide a stiffer feel and greater stability when fully loaded. To ensure the Disc Trucker continues to exceed expectations in terms of compatibility with modern product standards, its dropouts have been redesigned to accommodate flat-mount disc brakes and captured thru-axles. An updated fork incorporates dynamo routing and three-pack mounts for even more mounting options. - 100% Chromoly steel frame and fork; double-butted main triangle and E.D. coating for increased frame life - Braze-ons for fenders, racks, and almost anything else you might want to stick on your bike, plus spare spoke holders for when the road gets rough - Fork blade three-pack mounts for even more mounting options, plus routing for Dynamo hubs - Redesigned front and rear dropouts to accommodate captured 12mm thru-axles and flat-mount disc brakes - Clearance for 26 x 2.1" tires with or without fenders

A class-leading touring bike, the newly redesigned Disc Trucker provides versatility and dependability on the daily commute or trans-continental excursion. Fork blade three-pack mounts enable you to attach and haul even more stuff, and the frame features a low bottom bracket and long chainstays for comfort and stability while loaded down. With increased stack height and improved standover clearance, plus ample space for larger tires and fenders, it’s designed to go the distance. Introduced in 2012, the Disc Trucker is widely considered one of the best-in-class touring bicycles available today. Truly at home on the road, it features updated geo and modern component compatibility, along with versatile mounting options that make it ideal for daily commutes and months-long disappearing acts alike. Built from Surly’s proprietary, touring-compliant 'Natch tubesets, updates to the Disc Trucker include a shortened seat tube and slightly sloped top tube for better stand-over clearance, plus an increased stack height for a more relaxed riding position. Shortened chainstays offer improved stiffness and maneuverability around corners, while 12mm thru-axles provide a stiffer feel and greater stability when fully loaded. To ensure the Disc Trucker continues to exceed expectations in terms of compatibility with modern product standards, its dropouts have been redesigned to accommodate flat-mount disc brakes and captured thru-axles. An updated fork incorporates dynamo routing and three-pack mounts for even more mounting options. - 100% Chromoly steel frame and fork; double-butted main triangle and E.D. coating for increased frame life - Braze-ons for fenders, racks, and almost anything else you might want to stick on your bike, plus spare spoke holders for when the road gets rough - Fork blade three-pack mounts for even more mounting options, plus routing for Dynamo hubs - Redesigned front and rear dropouts to accommodate captured 12mm thru-axles and flat-mount disc brakes - Clearance for 26 x 2.1" tires with or without fenders

A class-leading touring bike, the newly redesigned Disc Trucker provides versatility and dependability on the daily commute or trans-continental excursion. Fork blade three-pack mounts enable you to attach and haul even more stuff, and the frame features a low bottom bracket and long chainstays for comfort and stability while loaded down. With increased stack height and improved standover clearance, plus ample space for larger tires and fenders, it’s designed to go the distance. Introduced in 2012, the Disc Trucker is widely considered one of the best-in-class touring bicycles available today. Truly at home on the road, it features updated geo and modern component compatibility, along with versatile mounting options that make it ideal for daily commutes and months-long disappearing acts alike. Built from Surly’s proprietary, touring-compliant 'Natch tubesets, updates to the Disc Trucker include a shortened seat tube and slightly sloped top tube for better stand-over clearance, plus an increased stack height for a more relaxed riding position. Shortened chainstays offer improved stiffness and maneuverability around corners, while 12mm thru-axles provide a stiffer feel and greater stability when fully loaded. To ensure the Disc Trucker continues to exceed expectations in terms of compatibility with modern product standards, its dropouts have been redesigned to accommodate flat-mount disc brakes and captured thru-axles. An updated fork incorporates dynamo routing and three-pack mounts for even more mounting options. Additionally, the 700c platform now offers clearance for 47mm tires for greater flexibility in tire options. - 100% Chromoly steel frame and fork; double-butted main triangle and E.D. coating for increased frame life - Braze-ons for fenders, racks, and almost anything else you might want to stick on your bike, plus spare spoke holders for when the road gets rough - Fork blade three-pack mounts for even more mounting options, plus routing for Dynamo hubs - Redesigned front and rear dropouts to accommodate captured 12mm thru-axles and flat-mount disc brakes - Clearance for 700c x 47 tires with or without fenders

A class-leading touring bike, the newly redesigned Disc Trucker provides versatility and dependability on the daily commute or trans-continental excursion. Fork blade three-pack mounts enable you to attach and haul even more stuff, and the frame features a low bottom bracket and long chainstays for comfort and stability while loaded down. With increased stack height and improved standover clearance, plus ample space for larger tires and fenders, it’s designed to go the distance. Introduced in 2012, the Disc Trucker is widely considered one of the best-in-class touring bicycles available today. Truly at home on the road, it features updated geo and modern component compatibility, along with versatile mounting options that make it ideal for daily commutes and months-long disappearing acts alike. Built from Surly’s proprietary, touring-compliant 'Natch tubesets, updates to the Disc Trucker include a shortened seat tube and slightly sloped top tube for better stand-over clearance, plus an increased stack height for a more relaxed riding position. Shortened chainstays offer improved stiffness and maneuverability around corners, while 12mm thru-axles provide a stiffer feel and greater stability when fully loaded. To ensure the Disc Trucker continues to exceed expectations in terms of compatibility with modern product standards, its dropouts have been redesigned to accommodate flat-mount disc brakes and captured thru-axles. An updated fork incorporates dynamo routing and three-pack mounts for even more mounting options. Additionally, the 700c platform now offers clearance for 47mm tires for greater flexibility in tire options. - 100% Chromoly steel frame and fork; double-butted main triangle and E.D. coating for increased frame life - Braze-ons for fenders, racks, and almost anything else you might want to stick on your bike, plus spare spoke holders for when the road gets rough - Fork blade three-pack mounts for even more mounting options, plus routing for Dynamo hubs - Redesigned front and rear dropouts to accommodate captured 12mm thru-axles and flat-mount disc brakes - Clearance for 700c x 47 tires with or without fenders

The Grappler is Surly's dedicated drop-bar trail bike. With mountain geo designed around a comfortable, confident drop-bar hand position, it's lively and responsive on single-track, double-track, and other degraded surfaces. Ready to haul essential gear for all-day dirt rides and quick bikepacking excursions, captured thru-axles front and rear provide ideal stiffness and handling. Built around 27.5" wheels and compatible with internally geared hubs and single-speed setups, Surly's tried-and-true Gnot-Boost spacing allows riders to run 142mm or 148mm rear hubs. - 100% Surly Chromoly steel frame and fork, featuring Surly's proprietary 'Natch tubing, double-butted main triangle, 1-1/8" headtube, non-suspension corrected. - Horizontal-slotted dropout, Surly Gnot-Boost spacing. - Seat stay-mounted bottle bosses on all sizes except XS, plus three-pack mounts at the top and bottom of the down tube and stealth dropper post routing. - E.D. coated frame for increased life expectancy. - 27.5 x 2.8" tire clearance (with or without fenders).

The Grappler is Surly's dedicated drop-bar trail bike. With mountain geo designed around a comfortable, confident drop-bar hand position, it's lively and responsive on single-track, double-track, and other degraded surfaces. Ready to haul essential gear for all-day dirt rides and quick bikepacking excursions, captured thru-axles front and rear provide ideal stiffness and handling. Built around 27.5" wheels and compatible with internally geared hubs and single-speed setups, Surly's tried-and-true Gnot-Boost spacing allows riders to run 142mm or 148mm rear hubs. - 100% Surly Chromoly steel frame and fork, featuring Surly's proprietary 'Natch tubing, double-butted main triangle, 1-1/8" headtube, non-suspension corrected. - Horizontal-slotted dropout, Surly Gnot-Boost spacing. - Seat stay-mounted bottle bosses on all sizes except XS, plus three-pack mounts at the top and bottom of the down tube and stealth dropper post routing. - E.D. coated frame for increased life expectancy. - 27.5 x 2.8" tire clearance (with or without fenders).

Ice Cream Truck solves the problem of having to choose between a fat bike and a trail bike. It boasts a symmetric 190mm-spaced Chromoly frame, suspension-corrected 150mm-spaced fork, and sporty trail-oriented geometry. Supported by massive 4.8-inch tires, it's ready to deftly tackle nearly any terrain. - 100% Surly Chromoly steel with 44mm headtube and internal dropper post cable routing - Frame is E.D. Coated for increased life expectancy - 1-1/8-inch straight steerer fork, Chromoly steel - 100mm threaded bottom bracket shell - Front and rear thru-axles, non-offset

The Karate Monkey features updated, progressive trail geometry, our custom trumpet tubeset, and Surly's Gnot-Boost rear dropout system. Available in a variety of colors, with multiple drivetrain and wheel size configurations. - 100% Surly Chromoly steel frame and fork; double-butted main triangle and 44mm headtube - The tubeset uses the same trumpet tubes found on Instigator 2.0 frame - Adjustable rear dropouts with 145mm Gnot-Boost spacing. Works with 142, 148 12mm thru, as well as 135mm w/ 10/12 washer - Internal dropper seatpost routing with 30.9mm seat tube ID - Clearance for 29 x 2.55" or 27.5 x 3" tires