Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Parts & Accessories

$4.99
- Includes 6 self-adhesive patches (25mm) and sand paper to scuff the tube surface for proper adhesion - Suitable for all kinds of punctures - Convenient plastic case is compact and easy to carry on every ride - No glue needed
$4.99
Pack of 10 replacement tubeless plugs for the Tubeless Kit and Classic Tubeless Kit.
$5.00
The FlatBoy patch kit will be your best friend when road-/trail-side flat repairs are needed. It features a set of six self-adhesive patches, sandpaper to lightly roughen before applying, and instructions in a snap-shut kit. Patches conform to inner tube perfectly and the kit is compact so you can always find a spot to carry one. Don't leave home without it. - Easy to apply to your inner tube so your ride can continue on unhindered. - Glueless patches with no mess. - Six patches are housed in a small, lightweight container that fits in the smallest places.
$5.00
Our Rim Strips provide the ultimate in protection between the rim and tube for all types of bicycle setups. - Nylon for maximum strength and effectiveness. - Conforms to rim profile.
$5.99
Compatible with all tubeless road, MTB and gravel tires. Refill packs with 10 repair plugs (5x thin and 5x thick).
$5.99
- Shim adds support to Presta stem used in a Schrader rim
$6.95 - $16.95
- Repairs punctures up to 1/4 (6mm) - Optimized for temps down to 15degF (-9.4degC) - Synthetic later minimizes the risk of allergic reactions
$6.99 - $19.99
Your tubeless wheels will benefit from the use of Orange Seal Tubeless Tire Sealant. It is proven to seal large punctures up to 1/4-inch and perform under varying temperatures and altitudes. Orange Seal Tubeless Tire Sealant is compatible with most bike tire systems and is eco-friendly.
$6.99 $10.00 30% Off
Specialized's Airlock Sealant is the in-tube solution for flat prevention, surpassing the competition in flat protection performance. It's featured here in a personal, 8oz container that's ideal for two standard wheels. - Non-toxic, non-separating formula doesn't have a limited shelf life like the competition. - Coats the tube for permanent protection. - Works with any bicycle tube with a removable valve core. - Works continuously to prevent slow leaks. - Completely homogenous, so it doesn't puddle. - 8oz bottle fills two inner tubes. - 8oz bottle includes valve puller and hose under cap.
$7.99
These oversized Presta valve nuts are specifically designed to provide extra clearance and extra leverage to better tighten tubeless valves. They're especially helpful on single-wall rims. -Concave to allow better engagement of the valve/rim interface -Oversize to provide extra torque when tightening -Especially helpful on single-wall rim tubeless setups -CNC-machined AL-6061
$7.99
Vittoria introduces Universal Sealant, the new range of anti-puncture bike tire sealants designed for Road and MTB use. The formula of the sealant has been improved. Universal Sealant does not contain ammonia, repairs larger punctures (up to 7mm), acts faster, and is compatible with both Road and MTB tubeless tires and with any type of inner tube. It is easy to use thanks to its specific pour spout that allows the application of the sealant straight from the valve. Universal Sealant is the universal anti-puncture bike tire sealant.
$9.95
Continental's Easy Tape Rim Strips are 20mm wide and are made of a tough, elastic and waterproof, non-adhesive nylon. This makes they quick and easy to install. Just stretch them over your rims and let them snap in place! Each box contain a pair of rim strips.
$9.99
Laugh in the face of punctures with Muc-Off's super lightweight inner tube sealant! The No Puncture Hassle Inner Tube Sealant is easy-to-install, and the cutting edge molecules seal holes in tubes of up to 4mm, ensuring that your ride is uninterrupted. - Proprietary water-based non-hazardous formula developed specifically for use with inner tubes - Compatible with a wide range of tube sizes and bikes - suitable for commuter, folding, urban, touring, MTB and e-bikes - Works on multiple punctures - Lasts the life of the inner tube/tire - Contains cutting-edge molecules to help seal holes quickly and effectively; seals holes in tubes up to 4mm
$9.99 - $153.99
Looking for a super lightweight but badass tubeless sealant? Boom, you've just found it my friend! No Puncture Hassle performs under the most brutal race conditions. The cutting-edge microfiber molecules fill the bigger holes and tears, whilst the advanced latex forms a strong seal instantly. The formula also contains a unique UV detection system that highlights any punctures you haven’t seen during your ride. Developed with the world's top downhillers and pro peloton teams, to give you the finest tire sealant available. It's non-corrosive and easily washes off with water. Compatible with tubeless ready and full UST wheels/tires, No Puncture Hassle works from 15psi-120psi and temperatures from -20°C to +50°C. Our pouch is designed to fit your Presta valve perfectly and is ideal to add to your toolkit or ride pack for emergency top ups on the go! - For Downhill, Enduro and Road tires - Seals tears and holes up to 6mm - Contains UV puncture detection - Won't dry out or ball - Works from 15psi-120psi and temperatures from -20°C to +50°C - Biodegradable
$9.99 - $140.00
Our new 2Bliss Ready Tire Sealant was custom-designed in partnership with a leading laboratory for tire sealants, and it also underwent extensive real-world testing with our Factory Athletes. What we developed is an innovative, ecological formulation that's the answer to the requirements that riders like you've been demanding. It will immediately seal punctures up to 6mm, whether it be on a road or mountain tire, as well as across global temperatures [-20° to 70°C]. Natural, micro holes in the sidewalls will seal well, and the system is safe for use with latex inner tubes, even inside tubulars. Please note that this sealant is ammonium-, protein-, and latex-free, so it holds no potential for allergic reactions, and there's no risk of it creating damage to bike parts. - Proven by our Factory Team Athletes. - Seals punctures up to 6mm. - Performs in a wide temperature range (-20° – 70°C). - Works in latex inner tubes inside tubulars. - Ammonium-, protein-, and latex-free, so there's no risk of allergic reactions or damage to bike parts. Recommended sealant amount per tire: - Road: 24-32mm - 30-40ml - Open Road: 33-50mm - 50-70ml - MTN: 2.0-2.3" 80-100ml - MTN: 2.4-3.0" 100-125ml
$10.50
The Problem Solvers Presta Valve Extenders add 33 to 50mm of length to your tube or tire valve so that it protrudes far enough out of deep-section rims so that you can attach your pump. These lightweight, durable aluminum extenders simply screw onto your Presta valves by hand.
$10.80 - $31.50
45NRTH utilizes a two-piece construction method to create a reliable and high-performing bicycle tire stud with a concave carbide-aluminum design. The open space and edges created by the large concave crown result in twice the surface area for increased traction and grip. - Concave tip for traction, durability, and longevity - Aluminum base to save weight - Compatible with 45NRTH stud insertion tool - Compatible with all studdable 45NRTH tires - We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss.
$10.95
Continental's Easy Tape High Pressure Rim Strips come in sizes to fit 700c and 650c road rims and are made of a tough, elastic and waterproof, non-adhesive nylon. This makes them quick and easy to install. Just stretch them over your rims and let them snap in place! They are also made specifically for when you're running extreme pressures and can handle up to 220 psi. Each box contains a pair of rim strips.
$10.99 - $23.99
Endurance formula lasts twice as long as standard Orange Seal. - Premium Latex coats the whole casing, from tire bead to tread cap - Seals punctures up to 1/8-inch, and slices up to 1/2-inch with the use of Nanites - Developed to add as little weight to a tire as possible - Made of eco-friendly biodegradable ingredients
$11.99
- CNC machined 7075 alloy construction - Sealed base prevents high pressure leaking - Designed to work with Aero dish rims - 30mm, 50mm and 70mm available
$11.99
The Problem Solvers Presta Valve Extenders add 30 to 70mm of length to your tube or tire valve so that it protrudes far enough out of deep-section rims so that you can attach your pump. These lightweight, durable aluminum extenders are for use with Presta valves that have removable cores. The proper tool for removing the cores and installing the extenders is included.
$11.99
- Permanently seals tube punctures up to 1/8 inch - Non toxic formula installs easily through Schrader valves - Complete with valve core remover and filler tube - Slime keg fills 160 tires at 1/2 the price per ounce of the 16 oz size
$12.20
Tubeless valves for DT Swiss rims for repair or replacement. - DT Swiss Narrow Base Tubeless Valve - 32mm
$12.99 - $30.00
Works with Zipp butyl inner tubes with a removable core as well as other leading tubular tires and inner tubes that have removable cores. Available as a kit (3 extenders and 2 wrenches) or individually. - For use with removable valve core Presta tubes - Knurled end to keep pump from slipping - 3mm hex broach in the barrel to guarantee a perfect seal when tightened - Integrated air seal
$13.50 - $112.50
45NRTH utilizes a two-piece construction method to create a reliable and high-performing bicycle tire stud, featuring a concave carbide-aluminum design. The super-sized concave crown creates open space and inside edges of the bowl, resulting in twice the surface area for increased traction and grip. - Concave tip for durability and longevity - Aluminum base to save weight - Compatible with the 45NRTH stud insertion tool - Compatible with all studdable 45NRTH tires - Large stud offers more bite than regular concave stud and less rolling resistance than XL stud - We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss.
$14.99 - $34.99
Built with Kevlar to deliver faster and stronger seals, FiberLink represents a new standard for tubeless bicycle tire sealant. Developed with Finish Line's proprietary FiberLink Technology, this groundbreaking pro latex formula seals quickly, ensures maximum seal integrity and delivers optimum longevity. - FiberLink Technology utilizes Kevlar fibers that work synergistically with fast-acting natural latex to seal punctures as they occur. Free-flowing latex cures rapidly to create an adhesive seal which is reinforced with interlinking Kevlar fibers - Low viscosity is ideal for race conditions - Fast-acting natural latex reduces air loss - Optimum longevity between refresh cycles - Low odor and easy to setup - 8oz Drip Bottle
$14.99
Tubeless repair kit from Muc-Off.
$14.99 - $66.99
Orange Seal’s rim tape comes in 18mm, 24mm, and 45mm widths fitting most bike rims. The elasticity of the tape allows greater flexibility in fitting different types of rims and form factors.
$14.99 - $21.99
Subzero tire sealant. It's formulated to maximize extreme frigid temperature; enabling riders in the far North to ride with flat protection. All while offering the same quick-sealing properties you’ve come to expect. - Premium Latex coats the whole casing, from tire bead to tread cap - Seals punctures up to 1/4" with the use of Nanites - Developed to add as little weight to a tire as possible - Made of eco-friendly biodegradable ingredients - Subzero sealant is developed for use in below-freezing conditions down to -20F
$14.99
Designed to repair punctures up to 3mm, the Panaracer Tubeless Patch Kits work with all UST tires. - Includes: 8cc tube of cement, scissors, 75mm x 50mm rubber patch, and needle/awl - Works on any brand of tubeless tire
$14.99
- Ingenious snap-In plugs do the work of rim tape at 1/3 The weight - Makes tire installation easier and nipple repairs faster than with tape - Red plugs fit rims with 8mm holes - Yellow plugs fit rims with 8.5-9.3Mm holes
$15.00
Precision engineered for precise inflation of your Zipp wheels, these Zipp Tangente Valve Extenders take the hassle out of short Presta valves. - For use with threaded Presta (non-removable core) tubes - Knurled end to keep pump from slipping - Available in all lengths to match all Zipp wheels - 3mm hex broach in the barrel to guarantee a perfect seal when tightened
$15.90 - $21.90
- 2-ply rubber shield fits between tire and tube to prevent flats
$15.95 - $35.95
Continental's Revo Sealant is specifically designed for use with their Revolution tubeless-ready tires and it's great for tubular tires, too. It seals punctures and contains no protein or ammonia so it's safe for use in all wheels, too.
$15.99
You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - 75mL: Repairs and inflates low-volume MTB tires in less than a minute. - 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.
$16.20 - $126.00
45NRTH utilizes a two-piece construction method to create a reliable and high-performing bicycle tire stud, featuring a concave carbide-aluminum design. The super-sized concave crown creates open space and inside edges of the bowl, resulting in twice the surface area for increased traction and grip. - Concave tip for durability and longevity - Aluminum base to save weight - Compatible with the 45NRTH stud insertion tool - Sold in a pack of 100 - XL Stud features a larger carbide tip diameter for increased traction
$16.90 - $164.90
- Ammonium/latex/protein free sealant
$16.99
The Lizard Skins Tube Strap is an easy way to stow a spare tube. The minimally designed Tube Strap is a lightweight on-bike storage solution for any rider. This versatile strap is made to securely attach under seats and other locations on bike frames. - On-bike storage solution - Inner sleeve to compress a tube - Silicone strips for stability - Compact and lightweight - Attach under the seat or other locations on the bike frame - Weight 1.3oz (37g)
$17.95
Continental's Valve Extenders are made of durable aluminum and come in four sizes so you can attach your pump to your valve, no matter how deep your rims are.
$17.99 - $37.99
Ultimate Tubeless Sealant uses FiberFoam technology to harness the power of carbon fiber to seal up to 7mm punctures without losing pressure. Get it while supplies last. - Effective down to 10F/ -12C - Seals 7.5mm holes for up to 6mo - Must be poured into tire during install - Not injector compatible (It seals holes bigger than your valve) - Use Replenisher every 90-120 days for best performance - 6, 9, and 12mm recycled carbon fibers are dispersed evenly by a foaming latex to create ultra strong seals - Made in the USA
$18.00 - $57.00
- Made of durable light weight polyurethane - Provides a protective layer between road hazards and the inner tube - Weighs less than liquid fills and thorn-resistant tubes - Can be reused - Easy, mess free installation
$18.99
High-performance tire sealant specifically designed for the tubeless systems of both mountain bikes and road bikes. The advanced formulation combines fast-acting polymers with suspended rubber particles to instantly seal punctures, providing a patch as durable as the tire itself. Developed with top professional teams, Tubeless Sealant is robust enough for the professional, immediately sealing punctures up to ¼” and long-lasting enough for the leisure rider, remaining functional for up to 6 months. For use on all mountain and road bike tubeless systems to prevent flats and seat beads. Can be used with aluminum or carbon wheels. Features: - Professional grade formulation. - Seals faster than the competition. - Forms durable seal that will not re-open. - Effective in all conditions and environments. - Safe on aluminum and carbon wheels. - Eco-friendly.
$19.90
- Half the weight of the original Mr. Tuffy Tire Liner - Rubber shield fits between tire and tube to prevent flats - Back of the liner is serrated to keep it in place inside the tire and curved to match the profile of the tire
$19.99
Compact tubeless tire repair kit with machined aluminum storage tube that doubles as a handle. Combined tire reamer and insertion tool. Includes five tire plugs. - Weight: 47g
$19.99 - $21.99
The FlatAway tire liner is a lightweight strip of Aramid fiber that protects against external punctures. It is excellent for touring or urban applications. Place it between your casing and your tube and ride with more security. - Adhesive backing holds FlatAway in place
$19.99 - $27.61 $19.99 - $30.43 Up to 18% Off
Prevents thorns and other road debris from puncturing the inner tube and deflating the tire. - Packaged in a process that avoids the difficult to install "pigtails" traditionally associated with liners - Equipped with Soft-Tips that prevent friction flats at the overlapping seam - Sold in pairs
$20.00
Optimized for carbon and aluminum rims, our top shelf tubular glue is a next generation formula. Derived from the most used and proven European recipe that has carried rubber on wheels for the Pro Peloton for decades. - Perfect for carbon and aluminum rims - Nitrile gloves in bottom of box to keep your paws clean - Red in color allows one to know where glue has been applied - Brush included on lid - Contains enough to mount 3 wheels
$23.99
Converts Presta valves for use with Schrader-compatible inflation devices. - Machined aluminum is lighter than brass alternatives - Rubber O-ring provides a secure seal to prevent air leakage - Sold as a card of 12
$24.00 - $42.00
- Tubeless Valve compatible with Stan's ZTR rim - Sold as a pair
$24.99
CushCore tubeless air valves are specially designed to work with a CushCore tire insert. The air passageway is T-shaped, rather than a simple through-hole, which prevents the insert from obstructing air flow through the valve. - Made from CNC machined from 6061 T-6 aluminum, anodized black - Tapered rubber collar permanently bonded at the sealing interface - The valve core can be removed to add tire sealant - Valve locknut with o-ring seal and valve cap are included - Sold as a set
$24.99
- Puncture protection for inner tubes - Suitable for commuter, folding, urban, touring, MTB and e-bikes - Seal multiple punctures up to 4mm - Lasts the life of the inner tube - Non-hazardous, water soluble, and contains corrosion inhibitors
$24.99 - $27.99 $24.99 - $29.99 Up to 7% Off
The VersaValve stem utilizes a large, sturdy base plate that can be fitted on different rims, by use of rubber grommets. The large base plate ensures a solid contact with the rim bed and the adaptable grommets guarantee an airtight fit on most rims for mountain, road or CX use. - Universal fit. One valve for all rim types - Replaceable grommets - Kit includes VersaValve stems, two types of grommet, extra valve cores and RVC tool
$24.99
Vittoria's Mastik'One is a professional-grade tubular cement that has been trusted by the pros for decades. It provides excellent hold on both aluminum and carbon rims, and gives you the piece of mind that comes with knowing you're riding on the best. - Choose from 250-gram tin or 30-gram 12-pack - 30 grams is enough for one to two tires depending on surface area
$25.00
CushCore tubeless air valves are specially designed to work with a CushCore tire insert. The air passageway is T-shaped, rather than a simple through-hole, which prevents the insert from obstructing air flow through the valve. - Made from CNC machined from 6061 T-6 aluminum, anodized black - Tapered rubber collar permanently bonded at the sealing interface - The valve core can be removed to add tire sealant - Valve locknut with o-ring seal and valve cap are included - Sold as a set
$25.00
No.9 Tubeless valves for use with Whisky Tubeless rims and most other systems. These alloy stems feature removable Presta cores and are designed to fit up to 8mm valve holes. - Available in a number of lengths and colors to perfectly fit your rims and your sense of style. - Includes two valves
$26.99
The Lizard Skins Utility Strap is an easy way to stow essential tools and a spare tube. The minimally designed Utility Strap is a lightweight on-bike storage solution for any rider. This versatile system is made to securely attach under seats and other locations on bike frames. The Utility Strap has a wide strap and durable metal buckle. - On-bike storage solution - Inner sleeve to compress the tube - Multiple spots for tools: CO2, Tire Lever, Multi-tool, etc. - Wide strap and durable metal buckle - Silicone and rubber grip for stability - Compact and lightweight - Attach under the seat or other locations on the bike frame - Weight 4oz
$29.99 - $34.99 $29.99 - $37.99 Up to 8% Off
- The same tubeless valves, now with a Tire Insert air flow system - 6 slots machined into the base of the valve stem allow air to flow freely around tubeless tire inserts - Upgraded to aircraft grade 7075 aluminum valve stem and cap - 4mm machined Allen Key slot for easy installation/removal - Valve core removal tool integrated into valve cap - Includes multiple rubber bases to optimize fit with multiple rim types
$33.00
Tubeless Universal Valve—ZIPP 3ZERO MOTO Removable Valve Core - Includes 1 tubeless—valve & 1 valve core wrench - Compatible With: WH-MOTO-30-A1
$34.99
Tannus Armour is the ultimate in tire protection and performance for all levels and styles of riding. Sitting between your tire and inner tube, the Tannus Armour provides 15mm of puncture protection on the top, as well as 2mm of sidewall protection from sharp objects and rocks. Whether you are a city biker, adventure tourer or prefer the off-road, downhill or gravel trails, Tannus Armour gives you increased grip and vibration dampening for a smoother, more comfortable and enjoyable ride. - Patented Aither Technology; Aither is a multi-cell foam compound that forms the structure of the Armour
$36.00 - $79.00
- Just like the Original version except specially designed for FatBike applications - 2-ply rubber shield fits between tire and tube to prevent flats - Fits both 26-inch and 29-inch tires
Page 1 of 2 Next page