Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Parts & Accessories

Wahoo ANT+ USB with Extension Cord
$39.99
Wahoo USB ANT+ dongle Kit connects KICKR, KICKR SNAP and other ANT+ enabled devices to a Mac or PC. The 3-foot extension cord extends the USB ANT+ transmitter away from the computer and towards the connected device to avoid signal interference.
Wahoo RPM Cadence Sensor (BT/ANT+)
$39.99
The Wahoo RPM cadence sensor is your sleek little solution for measuring cycling cadence data. It is wireless, magnet-less, lightweight, and easily mounts to your bike's crank arm or to your shoe. Bluetooth Smart and ANT+ dual band technology allows you to connect to and display data on both smartphones and GPS bike computers. Collecting cadence data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - It only weighs 7 grams! - Provides accurate cadence data during your ride - (1) mount with double sided 3M tape, or (2) use the silicone sleeve and mount with zip ties. - The RPM can be worn on your shoe for spin classes or use with multiple bikes - Two LED lights show the sensor's device connection (blue) and cadence detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM cadence sensor will fit with most bikes and frame sizes
Wahoo RPM Speed/Cadence Sensor Combo Pack (BT/ANT+)
$69.99
All you need for cycling data, all together at once! The Wahoo RPM Speed and Cadence sensors are both a sleek, wireless, and magnet-less solution. Each mounts easily to your bike and the Bluetooth Smart and ANT+ duel band technology allows you to connect and display data on both smartphone and bike computers. - Dimensions (LxWxH): 1.25" x.75" x 1" - Weight: 7 grams (without mount) - Battery: CR2032 - Battery Life: Up to 12 months - Water Rating: IPX7 (waterproof up to 5 ft) - Wireless Signal Strength: Up to 10 feet - Note: Speed Sensor is NOT compatible with spin bikes
Sigma Sport CR 2450 Battery
$4.99
CR2450 battery for use in SIGMA computers. Compatible models: - BC 1909 - BC 2209 - BC 2209 Targa - ROX 8.0/8.1 - ROX 9.0/9.1 - ROX 5 - ROX 6 - BC 23.16 STS
SRAM eTAP Battery Charger
$59.99
SRAM eTap batteries are literally a snap to remove and charge. Just flip the tool-free battery latch up and slide the battery up and out of the derailleur. Then snap the battery into the USB powered charger and connect the charger to any USB power source or A/C USB adaptor. A full charge takes just 45 minutes to complete. - Finish: Black - Compatibility: SRAM RED eTap
SRAM eTap Battery
$54.99
SRAM eTap Battery is the power source for the eTap system. The same power unit is interchangeable between front and rear derailleurs. - Up to 1000 kilometers of riding per charge - Weight: 24g - Finish: Black - Compatibility: SRAM RED eTap
SRAM eTap BlipGrip
$29.99
External Blip mount for aero extensions and base bars - 360 degree rotation for adjustment - Aero use only to fit 22.2mm OD bar 65mm in length - Fits all Zipp aero extensions and base bars - Blips not included - Weight: 57 grams for pair (does not include Blip) - Material: Polypropylene + TPE - Compatibility: 11-speed - Recommended Group: SRAM RED eTap
Quarq ShockWiz
$329.00
ShockWiz is a suspension tuning system for air-sprung mountain bikes that combines high-tech hardware with an intuitive smartphone app. It's lightweight, durable and powered by a long-lasting coin cell battery, ShockWiz automatically records and evaluates suspension performance every time you ride. The ShockWiz app displays straightforward adjustments that unite bike, terrain and riding style. ShockWiz works for all mountain bike riders, regardless of their experience or bike's intended use. It works on hardtail and dual suspension bikes, and for all levels of skill, speed, and terrain. With ShockWiz, you know exactly how your suspension is performing – and how to make it better. Features & Benefits: - Automated tuning recommendations - Shock tuning score - a snapshot of how well your suspension is set up for you - Works on hardtail and dual suspension bikes. Works for Cross-Country, Trail, All Mountain and Downhill. - Inexpensive, replaceable CR2032 battery lasts for months - Waterproof and dustproof - IP67 rating - Two alternative hoses (included) offer a range of fitting options - Smartphone app is compatible with Apple and Android phones Essential Details: - ShockWiz is designed for all mountain bike riders, regardless of your experience or bike's intended use. - You can tune for every riding style: Efficient (pedaling), Balanced, Playful or Aggressive. - Advice for air pressure, spring rate, compression and rebound is displayed in the intuitive smartphone app. - In the box: ShockWiz hardware, two hoses, rubber mounting boot and zip ties.
Profile Design UCM Universal Computer Mount 25mm
$10.99
Profile Design's UCM Universal Computer Mount provides a convenient 25mm long place to mount your computer on your aero bars. It installs without tools, stays put and can be positioned as needed for easily viewing and controlling your computer.
Profile Design UCM XL Universal Computer Mount 60mm
$10.99
Profile Design's UCM XL Universal Computer Mount provides a convenient 60mm-long place to mount your computer on your aero bars. It installs without tools, stays put and can be positioned as needed for easily viewing and controlling your computer.
Lezyne Cadence Speed Flow Sensor
$44.99
Advanced 2-in-1 speed and cadence sensor. Conforms 100% to Bluetooth Smart standards for max compatibility. Powerful rare earth magnet provides wider engagement spacing. Durable, lightweight polycarbonate construction with translucent body and LED indicators. Adjustable swingarm and versatile mounting system. Replaceable CR2032 coin cell battery optimized for long-lasting use. Includes O-ring mounts, spoke magnet, crank arm magnet.
Lezyne GPS Front Bar Mount
$19.99
The Forward Mount is a hinged handlebar mount featuring a stiff and durable composite matrix construction with secure X-Lock and an integrated rubber shim. With a pressed-in stainless steel nut and 3mm hex stainless steel bolt, this mount's sleek, lightweight design positions the GPS computer in front of the stem for better visibility and improved aerodynamics. The X-Lock is a secure and reliable mounting feature integrated into the Standard GPS Mount and the Forward GPS Mount. It safely locks in the computer for worry-free riding over any type of terrain.
K-Edge Combo Mount Interface
$19.99
Convert your K-Edge Garmin Computer Mount to be a Computer + Action Camera combination mount. Works with any camera that utilizes the GoPro sytle interface, including GoPro Hero, Garmin VIRB, and Shimano CM-1000. - Camera Adapter mount with GoPro style interface - Fits K-EDGE Garmin Mounts (K13-500, K13-505, K13-560) - Locks GoPro, Shimano, VIRB style cameras underneath Garmin Computer. - Centers camera in out of site position - Improves video clarity by removing plastic mount shake - Colors: Anodized Black - Weight: 14grams *Note: Garmin VIRB requires the GoPro adapter that is included in the box with the VIRB.
K-Edge Garmin Mount
$49.99 - $54.99
This is K-Edge's next generation of industry-leading Garmin Computer Mounts—stronger, easier, more versatile, and more stylish design to complement your Garmin and your bike. The ultimate upgrade for your Garmin computer. Their advanced co-polymer Garmin insert locks your computer in place with strength and security. Designed and tested extensively so that the replaceable insert breaks away instead of your computer tabs in the event of a crash or mishap. - CNC Machined 6061 T6 Aluminum - Compatibility – 31.8mm and 35mm diameter handlebars. - New clamp design is hinged for ease of installation. - Supported Computers – Most Garmin Edge, Forerunner, and Touring models, including the new Garmin Edge 520, Edge 20 and Edge 25 models (Edge 1000 - fits on the longer XL mount) - Combo Compatible – versions available that support GoPro style interface action cameras and lights - Weight – (31.8 mm) Standard Mount 45.4 grams; Combo Mount 55.4 grams Attention: ASSEMBLY BOLTS NOT MEANT TO BE REMOVED OR TAMPERED WITH AT ANY TIME. *TheNEW K-EDGE Handlebar Computer and Camera Mounts (1420, 1440, 1500, 1505, 1605, and 1905 series) are built in three parts. An integral part of our mounts are the connection where the arm and clamp are joined by two assembly bolts located on the underside of the mounts. THESE ASSEMBLY BOLTS ARE NOT MEANT TO BE REMOVED OR TAMPERED WITH AT ANY TIME. The torx head bolts are installed using a permanent thread-lock compound. Doing so will void all warranties. Please contact K-EDGE warranty manager Info@K-EDGE.com for questions or concerns. We highly suggest you follow the recommendations in the Garmin EDGE instructions that recommend use of the provided tether leash.
K-Edge Garmin Sport Mount
$29.99
K-EDGE’s legendary CNC machined aluminum quality and strength for the price conscious cyclist. Pro positioning of your computer, out-front and flush with the top of the handlebar. - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Compatible: Garmin EDGE 820, 520, 510, 500, 25 and 20. - Replaceable Garmin Insert with K-EDGE “Definitive Click” locking system - Fits 31.8MM Handlebars - NOT combo compatible - Weight: 48g - Anodized Color- Black
K-Edge Garmin XL Mount
$49.99 - $54.99
The Garmin XL Computer mount is K-Edge's next generation of industry-leading Garmin Computer Mounts—stronger, easier, more versatile, and more stylish design to complement your Garmin and your bike. The ultimate upgrade for your Garmin computer, specifically designed to accommodate the EDGE 1000, 810 and 800, also compatible with the smaller Edge models like 520, 510, 500, in addition to the Forerunner and Touring models. Their advanced co-polymer Garmin insert locks your computer in place with strength and security. Designed and tested extensively so that K-Edge's replaceable insert breaks away instead of your computer tabs in the event of a crash or mishap. K-Edge provides free replacement inserts, as needed. Attributes (specs): - CNC Machined 6061 T6 Aluminum - Compatibility – 31.8mm and 35mm diameter handlebars - New clamp design is hinged for ease of installation - Supported Computers – Garmin Edge 1000, 810, 800. Also compatible with new Garmin Edge 520, Edge 20 and Edge 25 models, in addition to Forerunner and Touring models. - Combo Compatible – Add the Action Camera Adapter or the complete Combo Mount for the added benefit of using both a computer and GoPro style interface action camera or
K-Edge Go Big On-Center Mount
$39.99 - $49.99
The new Go Big On-Center Mount the next generation in K-EDGE's industry leading GoPro style interface Camera Mounts. The new mounts provide easier installation with a stronger more secure platform for your action camera, available in 31.8 and 35mm options. On-Center give you a better framed image with the newer style cameras that have lenses centered on the camera, such as the GoPro Session and Garmin VIRB. - CNC Machined 6061 T6 Aluminum - Compatibility – fits 31.8mm and 35mm diameter bars; all mounting hardware included; works with all GoPro HERO Original, HERO2, HERO3, and GoPro Session Cameras. Shimano CM-1000, Garmin VIRB, and Garmin VIRB X. - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded. - Attention: ASSEMBLY BOLTS NOT MEANT TO BE REMOVED OR TAMPERED WITH AT ANY TIME. *The NEW K-EDGE Handlebar Computer and Camera Mounts (1420, 1440, 1500, 1505, 1605, and 1905 series) are built in three parts. An integral part of our mounts are the connection where the arm and clamp are joined by two assembly bolts located on the underside of the mounts. THESE ASSEMBLY BOLTS ARE NOT MEANT TO BE REMOVED OR TAMPERED WITH AT ANY TIME. The torx head bolts are installed using a permanent thread-lock compound. Doing so will void all warranties. Please contact K-EDGE warranty manager Info@K-EDGE.com for questions or concerns. We highly suggest you follow the recommendations in the Garmin EDGE instructions that recommend use of the provided tether leash.
K-Edge Go Big Pro Handlebar Mount
$44.99
The new Go Big Pro is the next generation in K-EDGE's industry leading GoPro style interface Camera Mounts. The new mounts provide easier installation with a stronger more secure platform for your action camera, available in 31.8 and 35mm options. Key Features and Benefits: - STRONG – CNC machined aluminum mount engineered to hold your camera securely in place no matter the terrain. - STABLE – High quality video footage with a solid platform to prevent shake you would get from a plastic option. - POSITION – Out front and low, the ideal location for mounting from the bars and the most popular position for on-bike footage. - EASY – Hinged handlebar clamp for ease of installation and removal. Simple 1-bolt hinged clamping system, quick and easy. - CNC Machined 6061 T6 Aluminum - Compatibility – fits 31.8mm diameter bars; all mounting hardware included; works with all GoPro HERO Original, HERO2, HERO3, and GoPro Session Cameras. Shimano CM-1000, Garmin VIRB, and Garmin VIRB X. Any action camera utilizing the GoPro interface. - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded. - Attention: ASSEMBLY BOLTS NOT MEANT TO BE REMOVED OR TAMPERED WITH AT ANY TIME. *The NEW K-EDGE Handlebar Computer and Camera Mounts (1420, 1440, 1500, 1505, 1605, and 1905 series) are built in three parts. An integral part of our mounts are the connection where the arm and clamp are joined by two assembly bolts located on the underside of the mounts. THESE ASSEMBLY BOLTS ARE NOT MEANT TO BE REMOVED OR TAMPERED WITH AT ANY TIME. The torx head bolts are installed using a permanent thread-lock compound. Doing so will void all warranties. Please contact K-EDGE warranty manager Info@K-EDGE.com for questions or concerns. We highly suggest you follow the recommendations in the Garmin EDGE instructions that recommend use of the provided tether leash.
K-Edge Go Big Pro Handlebar Mount for GoPro
$59.99
- CNC-machined professional grade aluminum camera mounts for Go Pro cameras - Lock the camera case on to either your handlebars or seat rails depending on model - Greatly reduces camera shudder and improves video images - Powerful clamping via all metal bolt/mount system for 31.8mm diameter handlebars on handlebar mounts - 1/4" mount provides a solid platform for any camera that has a standard 1/4" interface - Lifetime warranty, made in the USA
K-Edge Go Big Pro Saddle Rail Mount
$39.99
K-Edge's Go Big Pro Saddle Rail Mount is designed to lock your GoPro camera securely under your bicycle saddle with rock-solid reliability. Quick and easy attachment to standard bicycle saddle rails with camera angle adjustability to dial in your video and photos. Make your buddies jealous while making them look like heroes (albeit while riding your wheel) with this no-shake, no-break, and no-worries camera mount. Specifications: - Made in the USA - CNC Machined 6061 T6 Aluminum - Weight – 45 grams, super light, super strong - Compatibility – clamp design fits all standard 2-rail saddles including oversized carbon rails; all mounting hardware included; compatible with all GoPro HERO Original, HERO2, and the new HERO3 Cameras. Shimano CM-1000 and Garmin VIRB compatible when using the adapter supplied with the VIRB.
K-Edge K-EDGE Garmin Race Mount
$54.99
Superlight, machined aluminum, race mount for the ultimate Tour de France level performance. At 32 Grams the Race Mount is 33% lighter than the “standard” Garmin Mount. - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Compatibility: Garmin 820, 520, 510, 500, 25, 20 - Fits Handlebars: 31.8MM - NOT GoPro Compatible - Anodized Color: Black, Red, Blue, Red/Blue - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacturer defects. Damages due to abuse or crashing excluded. * Attention: ASSEMBLY BOLTS NOT MEANT TO BE REMOVED OR TAMPERED WITH AT ANY TIME. The torx head bolts are installed using a permanent thread-lock compound. Doing so will void all warranties. Please contact K-EDGE warranty manager Info@K-EDGE.com for questions or concerns. We highly suggest you follow the recommendations in the Sigma instructions that recommend use of the provided tether leash.
K-Edge Replacement Wahoo Insert Kit
$5.99
Replacement plastic insert kit for K-EDGE Wahoo Mounts. The co-polymer insert for Wahoo 1/4-turn style computers is a replaceable item. While it is extremely strong, it is designed to fail on a significant impact before the tabs on the back of the Wahoo break. Attributes (specs): – Qty 1 – K-EDGE Co-polymer Insert for Wahoo 1/4 Computer (Part No. K13-1604) – Qty 2 – M3 x 0.5mm x 6mm with Pre-Applied Nylon 180,18-8 S.S. Screws
K-Edge TT Mount for Garmin Computers
$74.99
The K-EDGE Garmin TT Mount is the most advanced Time Trial and Triathlon computer mount available. Featuring a twist-lock mechanism to lock your Garmin with confidence. The K-EDGE Garmin TT Mount’s aluminum design and its unique locking feature is by far the most advanced mount on the market. With traditional TT mounts for the Garmin computer, you have to either have enough room between the extensions to perform the ¼ turn “twist” or the computer has to be mounted above the extensions. - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Compatibility – 22.2mm diameter TT Extensions - Supported Computers – Garmin Edge 20, 25, 200, 500, 510, 520*, 800, 1000, and Forerunner 310XT - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded. *Garmin 520 is not compatible at this time.
K-Edge Wahoo Adjustable Stem Mount
$39.99
An excellent choice for mountain, cross, and road cyclists who prefer to have the computer above the stem. The mount replaces a standard 5mm spacer and is locked securely in place by the top cap compression system. - Supported Computers – Wahoo ELEMNT, Wahoo Bolt, Wahoo MINI - Compatible – 1-1/8" Steerer tube Diameter, - Thickness: 5mm, Length 50mm (Center-to-Center) - Recommended for 0 Degree to Negative Degree Stem Angles - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Weight: 25g - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded
Garmin ANT+ USB Stick
$49.99
Garmin's ANT+ USB stick plugs into your computer's USB port to wirelessly transmit your activities to Garmin Connect and Garmin's Training Center. It automatically receives your activity data when your compatible ANT+ Garmin device is within range.
Garmin Bicycle Mount Kit
$19.99
Garmin's Bicycle Mount Kit lets you attach any compatible Garmin to your bike's handlebars, so the data stays out in front where you can see it.
Garmin Bike Cadence Sensor Replacement Bands
$9.99
Garmin's set of Bike Cadence Sensor Replacement Bands fasten your Bike Cadence Sensor (sold separately) to any size crank arm.
Garmin Bike Speed Sensor 2
$39.99
Monitor your speed as you ride with this easy-to-install wireless sensor. With no magnets or other exposed parts to line up, this sensor is easy to install, maintain and move between bikes. The speed sensor 2 attaches to the hub of either wheel. You can set up wheel size in our Garmin Connect online community or self-calibrate with an Edge cycling computer or compatible Garmin device. Once set up, you’ll get accurate speed and distance at all times — even without a head unit. ANT+ connectivity and BLUETOOTH Low Energy technology let you sync to Garmin Connect and other training apps, compatible devices and fitness equipment for better data when you ride indoors and outdoors.
Garmin Bike Speed Sensor 2 and Cadence Sensor 2 Bundle
$74.99
Monitor your speed and cadence as you ride with these easy-to-install wireless sensors. With no magnets or other exposed parts to line up, these sensors are easy to install, maintain and move between bikes. The speed sensor 2 attaches to the hub of either wheel and self-calibrates with your Edge cycling computer or compatible Garmin device to give you accurate speed and distance at all times — even without a head unit. The cadence sensor 2 fastens to any size crank arm and measures pedal strokes per minute so you can get the most out of your training. Send live speed, distance and cadence data to compatible training apps or displays by using ANT+ connectivity and BLUETOOTH Low Energy technology. With both of these sensors on your bike, you can work to improve your personal best or see where you stand against the pros.
Garmin Cadence Sensor 2
$39.99
Monitor your pedaling cadence as you ride with this easy-to-install wireless sensor. With no magnets or other exposed parts to line up, this sensor is easy to install, maintain and move between bikes. Simply attach the sensor and ride. With no magnets or other exposed parts to line up, this sensor is easy to install, maintain and move between bikes.
Page 1 of 7 Next page